Pcie Mezzanine Card Support Bracket; Removing The Pcie Mezzanine Card Support Bracket - Dell PowerEdge M830 Owner's Manual

PCIe mezzanine card support bracket

Removing the PCIe mezzanine card support bracket

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the PCIe mezzanine card support bracket to replace a faulty system board.
1. Ensure that you read the
2. Follow the procedure listed in
3. Keep the #2 Phillips screwdriver ready.
4. Remove the PCIe mezzanine card.
Steps
1. Remove the screw that secures the PCIe mezzanine card support bracket to the system board.
2. Orient the PCIe mezzanine card support bracket upward and slide it until the tabs on the PCIe
mezzanine card support bracket disengage from the slots on the system.
3. Lift the PCIe mezzanine card support bracket away from the system.
58
Safety instructions.
Before working inside your system.