Using Multiple M-Series Readers With Same Cradle - Datalogic GRYPHON Dx30 Reference Manual

4
4.4.1

Using Multiple M-Series Readers With Same Cradle

If you want to use several M-Series readers with the same OM-Gryphon™ cradle,
you must first Bind the cradle with one of the readers (see previously described
configuration procedure).
S uccessive readers
config uration procedure substitutin
5.
T he green LED on the Gryphon™ Mx30 will blink: the reader is ready to be
positioned onto the cradle.
END of procedure.
If the cradle is not Bound to a reader, its address assumes a
random value which can cause conflicts and malfunctions to other
cradles within its range.
CAUTION
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see par. 4.8.
18
can be associated with the same cradle by following the
g the Bind command w
Ì$+RN1$-NÎ
Complete step 6.
ith Join (step 5).
Join
GRYPHON™ Dx30/Mx30