Datalogic GRYPHON Dx30 Reference Manual page 72

•
AIM standard identifiers are n
code for which the standard is not defined. The y value depends on the selected options
(check digit tested or not, check digit tx or not, etc.).
•
When customizing the Datalogic Standard code identifiers, 1 or 2 identifier characters can
be defined for each code type.
character must be selected as FF (disabled).
•
The code identifier can be singly disabled for any code by simply selecting FF as the first
identifier character.
•
Write in the Custom character identifiers in the table above for your records.
62
DATA FORMAT
ot defined for all codes:
If only 1 identifier
the X identifier is assigned to the
character is required, the second