Datalogic GRYPHON Dx30 Reference Manual page 31

CONFIGURATION
5.
Read the code above and the four-digit address
6.
Read the code above and the four-digit address
Whenever the system is composed of a single base station, the
first and last base station addresses (steps 5 and 6) must have
the same value.
NOTE
7.
END of procedure.
Y OUR RE ADER IS NOW READY TO READ BARCODES.
T o change the defaults see par. 4.8.
First STAR-System™ Address
ÌRSRÎ
device in the system.
Set Last STAR-System™ Address
ÌRTTÎ
device in the system.
Exit and Save Configuration
Ì$-?Î
of the First STAR-System™
of the Last STAR-System™
4
21