Install 3.5" Floppy Disk Or Card Reader - AOpen XC Cube TZ915 User Manual

2.5 Install 3.5" Floppy disk or Card reader

1
Install 3.5" Floppy disk or Card reader to the first Drive bay of the Drives Cage.
2
The screw aperture of the 3.5" Floppy disk or Card reader aim at the no.1 aperture of
the "FDD" sign in the Drives Cage. Then use the screw no.2 to screw it tightly.
3
When you install the cable and
power cord of the Floppy disk 34pin,
please pay attention to the red cable
should aline with the Floppy disk
and pin 1 of the Motherboard.
16
TZ65II_915-OL-E0501A[49.BZ101.0A1].indd 16
Due to the 3.5" Floppy
disk and Card reader must
display on the Front Panel,
then the user can easy to
use it! So the no.1 screw aperture of
the "FDD" sign can aline the Front
Panel. If you have the other kinds of
the 3.5" device need to use, you can
stand on the length of the device to
choose the suitable screw aperture.
2005/2/17, 下午 10:33