Table of Contents
Advertisement
3
To stand on your deject button
position of the Optical drive, you can
adjust the deject lever position of
the XC Cube Front Panel. It makes
you to press the deject button of the
Optical drive accurate.
4
When you install the cable and
power cord of the Optical drive
40pin, please pay attention to
the red cable should aline with
the Optical drive and pin 1 of the
Motherboard. As the functions of
the Audio Digital or Audio Analog,
please refer to your manual of the
Optical drive.
5
You can connect the other side of the
Optical drive 40pin cable and IDE
hander of the Motherboard. Please
pay attention to the red cable should
aline with the Optical drive and pin 1
of the Motherboard.
18
TZ65II_915-OL-E0501A[49.BZ101.0A1].indd
18
2005/2/17, 下午 10:34
Advertisement
Table of Contents
