AOpen XC Cube TZ915 User Manual page 14

4
There is a transparent plastic cover
on the other side of the Hard disk
bay. When you install the Hard disk
and match the cover, that's mean the
Hard disk is on the suitable position.
Please use the screw no.2 to screw
it! Don't remove the cover, because
it will help you to install correct next
time.
5
It takes the Hard disk bay back to the Drive Cage along the curve slideway, and
then locks the screw tightly.
6
When you install the cable and
power cord of the Hard disk
40pin, please pay attention to
the red cable should aline with
the Hard disk and pin 1 of the
Motherboard.
14
TZ65II_915-OL-E0501A[49.BZ101.0A1].indd 14 2005/2/17, 下午 10:33