Table of Contents
Advertisement
A. Outgoing Call Features
1 .OO Making Outside Calls
1 .Ol Local Trunk Dial Access
Description
Allows extension users to make outgoing CO calls
by automatic selection of an idle CO line.
Dialing the feature number for ARS/Local
Access" enables you to execute this function.
To activate this feature, set 'System-
Route Selection to 'No." If
set to "Yes," ARS feature is activated instead of
this feature.
Refer to Section 3-C-2.00 "Automatic Route
Selection (ARS)" for further information.
Programming
System
Programming
'System-Operation
"System-Local Access Group",
Hunt Sequence
'System-Numbering Plan
Ccinditions
.
An idle CO line available and hunting sequence is
determined by the system programming "System-
Local Access Group", Hunt Sequence.
If an extension user hears busy tone, there is no
idle CO line available.
If an extension user hears reorder tone, the user
is restricted from accessing this feature.
Refer to Section 3-C-l .Ol "Tot1 Restriction for
Local Trunk Dial Access," for further information.
If tenant service is activated,
group is limited to the trunk groups within the
same tenant.
The dialing plan followed is that of the trunk group
in hunt sequence 01 in "System-Local
Group."
CO Line
Reference
accessible trunk
Access
S-A-1
(70695)
Operation
1. Lift the handset .
You hear dial tone 1 or 3 or 4.
l
2. Dial the feature number for
(default).
You hear dial tone 1."
l
3 . Dial the telephone number of the
outside party.
CO Line Access "9"
Advertisement
Chapters
Table of Contents
