Panasonic KX-T336200 Installation Instructions Manual page 239

Attempting to delete the extension which is
registered as an overflow extension for UCD
group.
Attempting to delete the extension/RMT which
396
is registered as a DIL 1 :l call destination of CO
line.
Attempting to delete the extension which is
397
registered as a night answer point of CO line.
398 Attempting to delete the extension which is
registered as a walking station.
399 Attempting to delete the PITS paired with DSS-
console.
Attempting to delete the extension which is
registered as a night answer point for tenant.
401 Attempting to delete the extension which is set
to SDN.
Attempting to delete the ATT when the ATT is
403
assigned for day incoming mode in Trunk
group.
404 Attempting to delete RMT when the RMT alarm
is assigned.
405 Attempting to delete the external pager which is
registered as UNA point for CO line.
Attempting to delete the external pager which is
registered as a TAFAS for day/night incoming
mode for Trunk group.
407 Attempting to delete the external pager which is
registered as a paging destination for the ATT.
Attempting to delete the ATT which is specified
for maintenance device.
.
409 When deleting ATT, combination of operators 1
and 2 is incorrect.
411 Impossible to delete the card, for all of the ports
belonging to the card is not made pm-installed.
412 Impossible to delete the card, for DN is
assigned to an extension port.
413 Deleting the card is impossible, for it is
assigned as a maintenance device.
Probable Cause
(21292)
Countermeasure
Cancel the storage as an overflow
destination.
Cancel the storage as a DIL 1:l call
destination.
Cancel the storage as a night answer point.
Cancel the storage as a walking station.
Change the PITS paired with DSS Console.
Cancel the storage as night answer point.
Change the incoming mode destination other
than AI-T.
Cancel the assignment of RMT alarm.
Change the night answer point.
Change the incoming mode.
Change the paging destination.
After changing maintenance device. delete
Delete all the ports belonging to the card.
Delete all the ports belonging to the card.
Change the maintenance device.
I -
I
I
I