Table of Contents
Advertisement
Conditions
"Numbering Plan (NBP)" setting cannot be changed if
Numbering Plan is set to "2 (Fixed 1)" or "3 (Fixed 2)." If '1" is selected, this setting is
changeable.
Logical check is performed by every storage according to the following logic:
Extension numbers are three or four digits and the leading one or two digits
are assigned in this screen.
Feature numbers may be one, two, three or four digits.
Those numbers assigned in this screen cannot include the same number
assigned to other feature number as the part or whole of it.
digit "2" is assigned to the feature number for "Trunk Group 01-08 Access" and
.
another digits "21" is assigned for "Trunk Group 09-19 Access," it is checked at
the time of data storage. Similarly, '36" and '351" cannot be present at the
same time.
It i s . possible to store '0" through '9," =*, n "#," as the feature numbers. However, if
telephone extensions.
rotary
Item
Number
1st to 16th
01 to 16
Hundred Block
Extension
108 to 123
Other PBX
Extension 01 to 16
Extension numbers cannot include "*" and %."
For example, the
Advertisement
Chapters
Table of Contents
