Panasonic KX-T336200 Installation Instructions Manual page 115

However, if there exist port data, it is possible to change the cards as follows:
PLC card M HLC card
l
l
Deleting the ATLC card will be an error if there is one of the following assignments:
"Group-Trunk Group",
l
Incoming Mode (Day) is set to "ATT."
Intercept Routing (Day) is set to "ATT."
"Extension-Doorphone",
l
Doorphone Call Assignment is set to "ATT."
Deleting the DISA card will be an error if there is one of the following assignments:
"Group-Trunk Group",
l
Incoming Mode (Day) is set to 'DISA."
Incoming Mode (Night) is set to "DISA."
Deleting the HLC, SLC, LCOT or GCOT card will be an error if there is the
following assignment to the slot to be deleted:
Miscellaneous-Power Failure Transfer Assignment.
l
See Section 1 -A-5.00 "Service Cards Description" for installing the cards in
combination.
Function
The following functions appear on the function line of this setting screen.
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen.
For operation, refer to Section 7-l "Operation of Function Keys."
9-c-s
(70695)