Table of Contents
Advertisement
50.00 Automatic Busy-out Count (ABC)
Description
It is administrable to busy out the invalid CO line automatically to prevent
extension users from accessing it by monitoring the loop current sent through
CO line.
(Password level: Three or higher).
One of the following three options is assignable on a CO line basis.
(1) N=O
On CO calls, the system monitors a loop current sent through the CO line,
and if a loop current is not detected, busy tone is sent to the caller.
(2j
On CO calls, the system monitors a loop current sent through the CO line,
and if a loop current is not detected pre-assigned times (1 to 240)
consecutively, busy tone is sent to the caller.
Then the system busies out the corresponding CO line automatically.
(3) N=241
On CO calls, the system does not monitor the loop current sent through the
CO line, iherefore,
loop current is running or not.
to
Refer
Section 52.00 rNS 2" L-COT/G-COT Busy Out Looprelay.
Input Format
.
Index Number
I
Input Value for Item Number
None
Automatic Busy-out Count
CO line is always seized by extension users whether
Index Number
1011 to3166
Assigning Items
I I
(Loop Current Detection)
0 :
Yes
1 to240:
Yes
N o
241 :
(Default = 241)
10-C-76
Explanation
Input Value
(Automatic
N o
Yes
if loop current is not
detected by the pre-
assigned times (1 to 240)
N o
I
Busy-out)
Advertisement
Chapters
Table of Contents
