Table of Contents
Advertisement
Description of Assigning Items
Held Call Reminder
Held Call Reminder (ATT)
Transfer Recall
Pickup Dial Waiting
External First Digit
Time-Out
External Interdigit
Time-Out
External Interdigit
Time-Out (PBX)
Toll Restriction Guard
Time-Out
Call
Forwarding-No
Answer Time
Intercept Routing Time-
out (System)
Intercept Routing Time-
Out (DISA)
Attendant Overflow Time
SMDR Duration Time
TIE Interdigit Time-Out
Sets the time for Held Call Reminder for extensions. When this timer
expires, the extension is alerted that there is a call held for an
period of time
Sets the time for Held Call Reminder for the Attendant Console. When
this timer expires, the Attendant is alerted that there is a call held for an
extended period of time.
Sets the time for Transfer Recall on both extensions and Attendant
consoles.
Sets the waiting time for Pickup Dialing. The waiting time gives the user
an opportunity to dial digits prior to the automatic dialing taking place.
Sets the maximum time allowed between CO dial tone or pseudo dial
tone and the Time-Out first digit dialed.
Sets the maximum time allowed between digits on a CO call. This timer
does not apply for CO operator calls.
Sets the maximum time between dialed digits (Behind PBX).
Sets the time limit between dialing digits for CO operator calls. This
prevents a user from attempting to defeat toll restriction.
Sets the Call Forwarding-No Answer timer. This also functions as
-No Answer timer.
Sets the time limit for Intercept Routing (System). This timer is used
when an incoming CO call (DIL l:l, DID, TAFAS or night answer and so
on) is not answered. Call forward no answer will override this timer if an
extension has enabled Call Forwarding-No Answer Time-Out.
Sets the time limit for Intercept Routing (DISA). This is used when a
Sets the overflow time for the Attendant Console. When this timer
expires, a call will be routed to the overflow destination.
Determines the length of the SMDR duration timer. This timer starts
when the system has sent all the digits to the Central
Sets the maximum time allowed between digits on a TIE call after it was
received by the system.
9-D-20
(70695)M
Office.
Advertisement
Chapters
Table of Contents
