Table of Contents
Advertisement
Description of Assigning items
Up to 36 routing patterns can be programmed in this table.
This table is referenced by the system to identify the trunk route, when an extension user made a TIE call
by dialing the feature number for "TIE Trunk Access" or =Other PBX Extension number".
A routing pattern appropriate for each call is decided by the first three digits (except TIE trunk access
code) of the dialed number.
The sequence is used by both tenants but the trunk group will be skipped if it does not belong to the same
tenant as the caller.
C o d e
Delete Digit
Insert Dial
Trunk Group Hunt Sequence
(01 to 05)
Conditions
By pressing the NEXT Key, TIE Line Routing Table screens change as follows.
Assigns the leading one, two or three digits of the numbers for TIE calls.
Used to determine which trunk group is used for a TIE call.
Assigns the number of digits to be deleted from the beginning of the
dialed digits.
Assigns dialing number to be added to the beginning of the dialed digits.
Determines the trunk group hunt sequence to be used when
call. The sequence is used by both tenants but trunk group will be skipped
if it does not belong to the same tenant as the caller.
g-K-12
(70695)
.
Advertisement
Chapters
Table of Contents
