Univox DLS-30 User Manual

Distributor/Retailer:
Maintenance
UniVox DLS-30 do not need any maintenance under normal conditions. To
clean, remove DLS-30 from mains sockets and wipe over with a moistened
cloth. Never use alcohol, thinner or other organic materials. DLS-30 should
not be exposed to excessive direct sunlight, heat, thick dust, humidity or
mechanical shock.
Trouble shooting
1. Check that the yellow power supply lamp (8) is lit.
2. Check that the green lamp (9) flashes concurrently with the sound when the
TV is active. If it is not flashing, it could be a breach on the loop cable.
3. Don't forget to set your hearing aid's MTO switch to T or MT. If the lamps
light up as described above, there could be a problem with your hearing
aid.
Service
If the system does not work after having checked point 1-3
above, please contact the outlet where it was bought for
further instructions.
Bo edin AB, founded in 1965, develops, produces (UniVox) and sells wireless loop systems
and assistive listening devices. To ensure a high quality all products undergo careful tests and
to fulfil our customers needs the wide range also consists of products from other companies.
Approximately 1/3 of the sales are exported.
Bo EDIN AB Visiting address
Stockby Hantverksby 3 Förrådsvägen 2 B
SE-181 75 LIDINGÖ SE-181 41 LIDINGÖ
Sweden Sweden
Telephone E-mail
+46-8-7671818 info@edin.se
Telefax Web site
+46-8-7671820 www.edin.se
Loop amplifier with loop pad/loop cable
UniVox DLS-30 Enviro Series is a compact and powerful loop amplifier
system to use together with the TV set. The UniVox DLS-30 is our first totaly
lead free amplifier. This is why it has the notation Enviro Series.
Unpack the parts included in the box (please see below). On the following
pages you will find out how to connect UniVox DLS-30 to your TV set. The
MTO switch of your hearing aid shall be set in position T or MT.
We hope that you will be pleased with the product.
UniVox DLS-30 Enviro Series - Overview
The following parts are included in the box of UniVox DLS-30:
● Loop amplifier with automatic scart connector
● Loop pad or loop cable
● Transformer
The package also includes a piece of double-adhesive tape which can be used
to attach the amplifier to the back of the TV set.
UniVox DLS-30 Enviro Series
loop amplifier
Loop cable
UniVox DLS-30
®
Enviro Series
User Guide
Loop pad
Transformer