Univox DLS-50 User Manual

UniVox® DLS-50 (Part No. 202052)
Compact and powerful induction loop amplifier for use with TV/DVD/music/microphone
Pure Direct Sound
Distributor:
E-mail: neil@PureDirectSound.com
UniVox DLS-50 is a compact, yet powerful, loop amplifier for wireless listening through
your hearing aid. Connect your TV, DVD, stereo, MP3, microphone or any other sound
source that you want to hear clearly to any (or all) of the three inputs.
The DLS-50 box contains the loop amplifier, power adapter (transformer) and connector
cord (and a Loop Pad or wire if ordered). You can buy accessories making it possible to
use it in even more ways. For example you can connect the DLS-50 to the cigarette lighter
in your car with a 12V adapter and use the DLS-50 to hear on the phone with a phone
adapter. Wire will cover 600 s.f.
Connect the chosen loop:
Place the loop amplifier in a suitable place near the TV/DVD/Cable Box. Avoid the
amplifier coming in contact with delicate materials as it is possible for it to become
heated.
Loop pad: Put the loop pad under the chair where you want to sit. Connect the loop pad
cord to the rear panel.
Wire loop: The loop wire can, for example, be attached on the floor trim along the walls of
the room. It can also be placed under the carpet or in the ceiling. The loop should not be
positioned at mid-height (3-4 ft. above the floor) as this will influence the performance of
the system. Connect the wire ends behind the spring clips in the rear panel.
Microphone
strength indicator control control
Power Headphones Loop pad Ends of wire loop
Connect DLS-50 to your TV and/or other sound source:
The DLS-50 has two inputs that can be used to connect your TV, DVD, Cable Box or other
49 Piston Court, Stewartstown, PA 17363
Bass Treble Volume
control
( The Center for Hearing Loss Help)
a division of
Website: www.PureDirectSound.com
Loop current
indicator
Line Mic or Line Mic volume Mic

USER GUIDE

Power
(lit when on)