Specification; Function Description - Microh LED MAX PAR Operation Manual

LED MAX PAR can make very bright colorful and dynamic light scenery effects. It is widely applied to
entertainment halls, clubs and stages etc.
A

Specification:

1. Weight: 6.7kg
2. Size: 30×27×22cm
3: Power input: AC 120V/240V, 60Hz/50Hz
4: Wattage: 80W
5: LEDS: 24PCS RGB 3W LEDs: R8, G8, B8
6: Beam angle of LEDs: 30 degree
7: 3PIN female XLR socket and 3PIN male XLR socket
8: Built-in microphone
9, Led digital display
B. Function description:
1, By using MODE button to choose the required working mode, then using UP and DOWN to adjust the relative
reference date：
A． Color Choose ： under this mode，LED display show "C.L.X",
to adjust "X".
0---BLACK 1---RED
B． Color change: under this mode, the display show "J. X X", "X X"=01-99 means the speed of color
change, press UP or DOWN button to adjust the speed of color change.
C． Color fade: under this mode, led display show "F.X.X", "X X"=( 01~99）means the speed of color
fade, press UP or DOWN button to adjust the speed of color fade.
D． Auto mode:：under this mode, led display show "
E． Sound mode：under this mode, the led display show "S.XX", "XX"=（00~31）means levels for sound
sensitivity. Press UP or DOWN button to adjust the levels of sound sensitivity.
F． Slave mode：under this mode, the led display show "S.L.A." ， the master fixture decide the running state
of current fixture，the above A~E all have master function.
Operation Manual
2---green 3---blue 4---purple
A - -",
"
X"=0-7, press UP or DOWN button
5---yellow 6---cyan 7---white
auto run the color change and color fade.