Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Microh DUO BEAM/RG
Summary of Contents for Microh DUO BEAM/RG
- Page 1 User Manual DUO BEAM/RG...
- Page 2 Thank you for purchasing the DUO BEAM/RG Laser Show System. This manual is intended to help you to use the functions of the unit. It is suggested that you should refer to this instruction manual before operating the DUO BEAM/RG.
- Page 3 The rear panel view: Installation Carefully inspect your Laser Show equipment as you unpack it. If any damage is evident, such as dents or scratches on the covers or broken knobs, etc., immediately notify your carrier and your dealer. 2. Hang the unit in a safe place. Please ensure that the unit is properly secured. 3.
- Page 4 Sound Active Mode When the equipment operates in this mode, the patterns will be changed by music. Please follow the instructions as below: 1) Set the 9 bit of DIP Switch on the back panel to the “OFF” position (Factory default).
- Page 5 The DUO BEAM/RG has no major serviceable parts. Repair of electronic components (transistors, ICs and Diodes) or changing other parts are not allowed by unauthorized service centers. If there is a problem with the DUO BEAM/RG, it must be returned to the dealer that you purchased the unit from.
Need help?
Do you have a question about the DUO BEAM/RG and is the answer not in the manual?
Questions and answers