Barco E-2320 C Service Manual page 28

LCD panel replacement
6.6.5 Remove Signal board Cover
6.6.5.1 For Nio 3 & 5 MP
To remove the Signal board cover:
6.6.5.2 For Nio 2MP
To remove the Signal board cover:
28
1. Remove the 2 screws and 2 bolts at the input connectors.
2. Remove the 13 screws fastening the signal board cover.
3. Carefully lift the signal board cover and slide it over the input con-
nectors. Be careful not to damage the DVI connector.
1. Remove the 2 screws and 4 bolts at the input connectors.
Nio 2-3-5 MP