Writing Display Parameters In The Display - Barco E-2320 C Service Manual

Writing display parameters in the display

6.2 Writing display parameters in the display
To write the EDID PROM content:
To write the EEPROM data:
20
1. Start the software tool "Mfdcontrol.exe" (version August 12 2002
at least).
2. In the main menu, select the proper display.
3. In the main menu, click on EDID.
4. Click on Load and locate the proper file.
5. Click Open to select the file.
6. Click on Write (EDID PROM) to write the contents in the new EDID
PROM.
1. Start the software tool Mfdcontrol.exe.
2. In the main menu, select the proper display.
3. Click on Upload.
4. In the Upload window, click on File to EEPROM and locate the
proper file.
5. Click Open to select the file.
6. The data is written into the display EEPROM.
Nio 2-3-5 MP