Firmware: Uploading New Firmware - Barco E-2320 C Service Manual

5.5 Firmware: Uploading new firmware

To upload the firmware:
Proceed as follows:
Nio 2-3-5 MP
1. Start the program Mfdcontrol.exe
2. In the main menu, select the display of which you wish to check
the firmware version.
3. In the main menu, click the Upload button
4. Select "Upload Code" in the dialog box
5. Select the folder and file with the new HEX code.
Remark : the hex-code for upload is of a different type than the
hex-code for programming the flash memory on a programmer !
Do not mix up the two or the display will become unusable.
6. During the upload, a dialog box is displayed with the status. The
display will reboot when the upload is finished.
7. When finished, a message is displayed. Press OK and Exit to
return to the main menu.
See Section "First level service".
Firmware: Uploading new firmware
17