Step 6 - Device Configuration - Datalogic Matrix 300N Reference Manual

RAPID CONFIGURATION
STEP 6 – DEVICE CONFIGURATION
Image Setup for Software Adjustable Focus Models
NOTE: For Manual Adjustable Focus models go to page 16 then continue
with Code Setup on page 21.
To begin configuration, the reader must be correctly mounted at the correct reading distance
for your application so that its Field of View covers the application reading area.
1. From the Task Area select New Configuration – Single Device. The device enters run
mode and begins acquiring images.
2. Place the Grade A Barcode Test Chart in the reading area. Once positioned, stop
image acquisition by clicking on the Pause button.
(Liquid Lens)
1
11