Verify Master/Slave Setup - Datalogic Matrix 300N Reference Manual

2

2.3.4 Verify Master/Slave Setup

From the Master Station 1 configuration, run the application and monitor the output data from
the DL.CODE Console or a configured channel terminal.
You can also temporarily apply the Reading Mask field in place of each Code Content field
to verify if all devices are reading. To do this:
a) from the Master, change each Expected Code field from Code Content to Reading
Mask.
b) Save on device overwriting Station 1 with Clone Master Configuration on
Slaves DISABLED!
42
MATRIX 300N™ REFERENCE MANUAL