On-Board Ethernet Connector - Datalogic Matrix 300N Reference Manual

A

ON-BOARD ETHERNET CONNECTOR

A Standard M12 D-Coded female connector is provided for the on-board Ethernet
connection. This interface is IEEE 802.3 10 BaseT and IEEE 802.3u 100 BaseTx compliant.
Figure 79 - M12 D-Coded Female Ethernet Network Connector
Pin
1
2
3
4
Power over Ethernet (PoE) Models
Figure 80 - M12 D-Coded Female Ethernet Network Connector
Pin
1
2
3
4
CAUTION: Matrix 300N PoE models only accept Alternative A (power
over RJ45 pins 1, 2, 3, 6), Class 0 power levels. Use an Endspan or
Midspan PSE device that supports this configuration (i.e. PoE switch or
Power over Ethernet Adapter).
Alternative B (power over RJ45 pins 4, 5, 7, 8) using an Endspan or
Midspan PSE device is not supported.
156
3
On-Board Ethernet Network Connector Pinout
Name Function
TX + Transmitted data (+)
RX + Received data (+)
TX - Transmitted data (-)
RX - Received data (-)
3
Power over Ethernet Network Connector Pinout
Name Function
TX +/DC- Transmitted data (+) DC power (-)
RX +/DC+ Received data (+) DC power (+)
TX -/DC- Transmitted data (-) DC power (-)
RX -/DC+ Received data (-) DC power (+)
MATRIX 300N™ REFERENCE MANUAL
4
1
2
4
1
2