Step 5 - Device Configuration; Automatic Or Advanced Setup - Datalogic Matrix 120 Product Reference Manual

STEP 5 - DEVICE CONFIGURATION

Automatic or Advanced Setup

Automatic Setup:
reading distance (for software adjustable focus liquid lens models), and code definition
parameters to obtain the most stable decoding conditions for a single code symbology
based on the images presented to the reader. It can be set to include Image Filters if
necessary. See the table below for codes and filters managed by Automatic Setup. Auto-
matic Setup is especially useful for DPM applications.
Enabled 1D Codes
CODE 128
EAN 128
CODE 39
CODE 93
CODABAR
PDF417
MICRO PDF417
GS1 DATABAR
GS1 DATABAR STACKED
GS1 DATABAR LIMITED
GS1 DATABAR EXPANDED
GS1 DATABAR EXPANDED STACKED
UPCEAN FAMILY EAN13
UPCEAN FAMILY EAN8
UPCEAN FAMILY UPCA
UPCEAN FAMILY UPCE
Advanced Setup:
ware and manual focusing adjustment, and code definition parameters that can be fine-
tuned semi-automatically and manually to obtain the best results for applications of any
complexity.
NOTE
provides an automatic procedure for setting optical/illumination,
Enabled 2D Codes
DATAMATRIX ECC 200
QR
MICRO QR
AZTEC
MAXICODE
DOTCODE
provides access to the complete array of optical/illumination, soft-
If your application requires multiple code symbologies, multiple image
settings, Code Grading or other parameter settings for decoding, then
use the Advanced Setup, see Advanced Setup.
STEP 5 - DEVICE CONFIGURATION
Enabled Filters
ERODE 3x3, 5x5 and 7x7
DILATE 3x3, 5x5 and 7x7
SMOOTHING
PRODUCT REFERENCE GUIDE 17