Time program
(cont.)
Example: You want to set a different time program for
Monday:
1. Select "Monday-Sunday". Set the time program.
Heating time program
Monday-Sunday
Monday-Friday
Saturday-Sunday
Monday
Select with
Fig. 9
Note
The tick is always set at the sections of the week
with identical time phases.
Factory setting: Same for all days of the week,
therefore "Monday-Sunday" is ticked.
2. Select "Monday". Set the time program for this.
Note
The "Saturday-Sunday" part of the week will be
ticked because this is now the only part of the week
which has identical time phases.
Heating time program
Monday-Sunday
Monday-Friday
Saturday-Sunday
Monday
Select with
Fig. 10
Deleting time phases
Set the time for the end point to the same time that
■
was set for the start point.
Or
For the start point, select a time prior to 00:00 h.
■
The display shows the selected time phase as
"- - : - -".
Heating
Mo-Fr
0
2
4
6
8 10 12 14 16 18 20 22 24
- -:- - - - -:- -
?
u
- -:- - - - -:- -
§
u
Adopt with
Fig. 11
HC1
ê
ç
ê
ê
(
HC1
ê
ê
ê
ç
(
HC1
Normal
Normal
OK
Operation
15