Calling Up Information - Viessmann VITODENS Operating Instructions Manual

Scanning

Calling up information

Subject to the components connected and settings
made, you can call up current temperatures and oper-
ating conditions.
The extended menu splits the information into groups:
"General"
■
"Heating circuit 1"
■
"Heating circuit 2"
■
"Heating circuit 3"
■
"DHW"
■
"Solar"
■
"Reset data"
■
Note
If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is dis-
played.
Detailed options for calling up data on individual
groups can be found in chapter "Options for calling up
data".
Extended menu
1.
2. "Information"
3. Select the group.
4. Select the required information.
Calling up the solar yield in conjunction with solar
thermal systems
Extended menu
1.
2. "Solar energy"
Calling up a service message
If your heating system is due for a service, the
bol flashes on the display and "Service" is shown.
Service
Continue with
Fig. 23
28
OK
The solar energy yield is shown in diagrammatic form.
The flashing line on the graph indicates that the cur-
rent day is not yet over.
Solar energy
4.0
0
We Th
kWh
Th 03/05/12
Select with
Fig. 22
Note
Further options fro calling up data, e.g. for the solar cir-
cuit pump hours run, can be found in the extended
menu under "Information" in the "Solar" group.
Resetting data
You can reset the following data:
Burner hours run.
■
Fuel consumption.
■
In conjunction with a solar thermal system:
■
Solar energy yield, solar circuit pump hours run and
hours run output 22.
All the above data simultaneously.
■
Extended menu
1.
2. "Information"
3. "Reset data"
sym-
Fr Sa Su Mo Tu We
1.3