Setting The Display Contrast - Viessmann VITODENS Operating Instructions Manual

Setting the display contrast

Extended menu
1.
2. "Settings"
Setting the display brightness
If you would like the texts in the menu to be more
clearly legible, change the brightness for "Control".
You can also alter the screen saver brightness.
Extended menu
1.
2. "Settings"
Naming heating circuits
You can name all heating circuits individually. The
abbreviations "HC1", "HC2" and "HC3" will be
retained.
Extended menu
1.
2. "Settings"
3. "Name for heating circ."
4. "Heating circuit 1", "Heating circuit 2" or "Heat-
ing circuit 3"
5. "Change?"
6. You can select the required character with / .
7. / takes you to the next character.
8. Press OK to accept all entered characters at once
and simultaneously exit this menu.
Note
You can delete the name entered with "Reset?".
3. "Contrast"
4. Set the required contrast.
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
Example:
Name for "Heating circuit 2": Apartment
Heating circuit 2
g
f
Heating circuit 1 e
d
c
Change with
Fig. 19
Heating circuit 2
Apartment
Adopted
Fig. 20
The menu shows "Apartment" for "Heating circuit 2".
Apartment
Party mode
Economy mode
Set room temperature
Set reduced room temp
Select with
Fig. 21
Further adjustments
HC2
(
HC2
HC2
Ù Ú
22°C
ß
(
25