Setting The Preferred Heating Circuit For The Standard Menu - Viessmann VITODENS Operating Instructions Manual

Further adjustments

Setting the preferred heating circuit for the standard menu

If your heating system has several heating circuits,
you can select the heating circuit to be displayed in the
standard menu.
Setting the time and date
The time and date are factory-set. If your heating sys-
tem has been shut down for a prolonged period, you
may need to reset the time and date.
Extended menu
1.
2. "Settings"
Language selection
Extended menu
1.
2. "Settings"
Setting the temperature unit (°C/°F)
Factory setting: °C
Extended menu
1.
2. "Settings"
Restoring factory settings
You can reset the factory settings of all modified values
for each heating circuit separately.
Extended menu
1.
2. "Settings"
26
Extended menu
1.
2. "Settings"
3. "Standard menu"
4. Select the heating circuit:
"Heating circuit 1" (for heating circuit 1)
■
"HC1" is displayed
"Heating circuit 2" (for heating circuit 2)
■
"HC2" is displayed
"Heating circuit 3" (for heating circuit 3)
■
"HC3" is displayed
3. "Time / Date"
4. Set the time and date.
3. "Language"
4. Select the required language.
3. "Temperature unit"
4. Select the temperature unit "°C" or "°F".
3. "Standard setting"
4. "Heating circuit 1", "Heating circuit 2" or "Heat-
ing circuit 3".