Boot Sequence; Swap Floppy Drive - DFI G586IPV User Manual

Boot Sequence

This category determines which drive to search first for the disk operat-
ing system (i.e. DOS). The default is A, C.
A, C
The system will first search for a floppy drive and then a
hard disk drive.
C, A
The system will first search for a hard disk drive and
then a floppy drive.
CDROM, C, A
The system will first search for a CD-ROM drive, then a
hard disk drive and then a floppy drive.
C, CDROM, A
The system will first search for a hard disk drive, then a
CD-ROM drive, and then a floppy drive.

Swap Floppy Drive

Enabled When this option is enabled and the system is booting from
the floppy drive, the system will boot from drive B instead of
drive A.
Disabled When this option is disabled and the system is booting from
the floppy drive, the system will boot from drive A.
Boot Up Floppy Seek
During POST, the BIOS will determine if the floppy disk drive installed is
40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are
all 80 tracks.
The BIOS will check whether the floppy disk drive installed is
Enabled
40 or 80 tracks. Note that the BIOS cannot distinguish be-
tween 720K, 1.2M or 1.44M drive types as they are all 80
tracks.
Disabled The BIOS will not search for the type of floppy disk drive by
track number. Note that there will not be any warning mes-
sage if the drive installed is 360KB.
28