Panasonic KX-TVP200E Installation Instructions Manual page 64

Voice processing system
Hide thumbs Also See for KX-TVP200E:
Table of Contents

Advertisement

C
Note:
There are five options in this mode. System Programming specifies one:
(a) Disable:
(b) Select:
(c) Before:
(d) After:
(e) Without:
When Busy or No-Answer
The VPS retries notification as many times as specified in "Retry Times".
The callback number is displayed on the beeper only for the first set of
retries.
* If the message is recorded at the last moment of a notification time, the notification time
may expire before the VPS starts calling. In this case, the callback number is never
displayed even if it is entered correctly.
Conditions
• Only the Subscriber or the Message Manager who is authorized by Class of
Service programming can use this feature.
• To use this feature, the following two conditions must be satisfied:
(a) The callback number display code must be included in the beeper
(b) The beeper is activated and it is within the notification time.
• To differentiate voice mail callback notification from regular beeper pages,
it may be helpful to prefix the callback number with a one or two digit code
of your choice.
• If the caller does not enter a callback number, the VPS displays the system
callback number stored in the VPS.
• The VPS starts notification via the beeper immediately after the message
with a callback number is recorded. Even if the VPS is attempting to retry
notification of other messages, the attempt is canceled.
S.A.
• "Number to Dial" (page 4-23)
• "Beeper Callback No. Entry Mode" (page 4-33)
• "Outgoing Call Ports" (page 4-67)
"Max. Digits for Callback No." (page 4-67)
"Callback No. Entry Interdigit Time-Out" (page 4-67)
"System Callback No." (page 4-68)
3-8
Features
3
The callback number is the number which the caller wishes you
to callback.
Deactivates this mode. Notification is made without the
callback number display.
The VPS asks the caller to enter a callback number only
when the message is specified as urgent.
The VPS asks the caller to enter a callback number before
message recording.
The VPS asks the caller to enter a callback number after
message recording.
The VPS asks the caller only for the entry of a callback
number. The caller cannot record a message.
number.
Features and Services

Advertisement

Table of Contents
loading

Table of Contents