Panasonic KX-TVP200E Installation Instructions Manual page 2

Voice processing system
Hide thumbs Also See for KX-TVP200E:
Table of Contents

Advertisement

THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE
PERSONNEL.
WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS
BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD
IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.
DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THE
POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT, AND
RECONNECT THE POWER FIRST.
THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY
REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHING CONTACT
SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO REGULATIONS.
THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE,
ENSURE THAT THE SOCKET-OUTLET IS LOCATED/INSTALLED NEAR THE
EQUIPMENT AND IS EASILY ACCESSIBLE.
NOTE
• This Installation Manual does not show complete model numbers that indicate
the country where your models should be used. The model number of your unit
is found on the label affixed to the unit.
Attention
Precaution
WARNING
MODEL NO. – – – – – – – –
(label)
73/23/EEC
89/336/EEC
92/31/EEC
93/68/EEC
APPROVED for connection to
telecommunication systems specified
in the instructions for use subject to
the conditions set out in them.
504265
i

Advertisement

Table of Contents
loading

Table of Contents