System Expansion - Panasonic KX-TVP200E Installation Instructions Manual

2.2 Installation

2.2.2 System Expansion

Installing an optional Port card
The KX-TVP200 can handle up to eight calls simultaneously by installing the
following optional Port cards.
• KX-TVP102 (2 Digital/Analog ports expansion card)
• KX-TVP204 (4 Digital ports expansion card)
No Port cards are installed at the factory.
Precaution
When installing an optional Port card, make sure the Power Switch is turned off.
To protect the printed circuit board from static electricity, first discharge any body
static by touching the grounding strap. Refer to the manual accompanying the op-
tional card about precautions and the installation procedure.
The optional Port card for system expansion should be inserted into a proper slot as
illustrated below.
KX-TVP102 (2 Digital/Analog ports expansion card)
1.
Remove the adhesive tape from the
card.
2.
Loosen screw* with a screwdriver.
* The screw is unnecessary after
installation.
3.
Loosen the screw on the grounding
strap, then remove the strap from the
unit.
2-8
Installation
4.
Insert the optional Port card into the
SLOT 1 using the guide rails.
5.
Press the left and right card latches
firmly, then fix the grounding strap to
the unit with a screwdriver.
Card latch
Guide rail