Maintenance Schedule - Yeti Cycles ASX '07 Owner's Manual

maintenance
maintenance
Yeti has outlined below the service and maintenance that can and should be performed
by the owner and requires no special tools. Following these guidelines will help maintain the performance
of your bicycle and prevent more serious problems from arising. this guide is by no means an absolute
rule which to follow. Common sense should be practiced and if an issue surfaces before the maintenance
schedule interval, visit an authorized dealer for inspection and or maintenance.
action weekly
Clean and lube Chain
Check tire pressure
Clean bike of mud and debris (never
spray water directly into frame or
components)
Check brake function
Check shock pressure, if applicable
Check for loose bolts and tighten if
necessary
Check headset and tighten/loosen if
necessary
thoroughly clean pivot points with a
rag (do not lubricate)
replace brake pads if necessary
Check tires for wear
Check spoke tension, and retention if
necessary
Check chain for worn, damaged, or
loose links. replace chain if necessary
Complete tune-up performed by an
authorized Yeti dealer
maintenance 12
monthly 3 months annually
x
x
x
x
x
x
x
x
x
x
x
x
torque
Yeti has outlined a brief list of torque specifications for bolts and components that may need to
be tightened while performing basic maintenance. this is by no means a comprehensive list, just a guide.
if a bolt or component needs to be tightened that is not encompassed by this list, refer to the specific
manufactures torque specification guide.
Caution:
The torque specifications listed should be used as a guide when performing maintenance. Technological
advances have made bicycles and bicycle components more complex, and the pace of innovation is increasing.
Because of these advances, YETI recommends that you refer to the torque specifications of the manufactures
component you are adjusting. In order to help minimize the chances of an injury, do not perform any maintenance that
you are not confident can be completed within your abilities.
x
maintenance?
if you are having trouble with any of the
maintenance tasks that need to be performed contact your
local dealer or visit www.parktool.com and check out the
repair help section. this section contains detailed instruction
on many of the service items listed in the maintenance
schedule.
torque specs
125 -150
pivot Bolts
Derailleur Hanger Bolts 30 -45
Handlebar Binder Bolt 150 -180
175 -260
stem Binder Bolt
seatpost Binder Bolt 150 -180
saddle Clamp Bolts 175 -250
70 -86
rear Derailleur
Front Derailleur Clamp 45 -60
Chainring Bolts 88 -132