PEG0/ PEG1-Gen X
Configure auto, Gne1, Gen2, or Gen 3.
Run-time C7 Allowed
Enable or disable the entry to C7 state [Run-time control]
Don't enable this feature until you have all the appropriate save/restore control-
ler/end point state.
Enable PEG
Enable/Disable/Auto the PEG.
Detect Non-Compliance Device
Detect Non-Compliance PCI Express Device in PEG
Program PCIe ASPM after OpROM
Enabled: PCIe ASPM will be programmed after OpROM
Disabled: PCIe ASPM will be programme before OpROM
PEG0/ PEG1 De-emphasis Control
Configure the De-emphasis control on PEG
PEG0/ PEG1 ASPM
Control ASPM support for the PEG: Device 1 Function 0. This has no effect if
PEG is not the currently active device.
PCE-3028/4128 User Manual
Figure 3.55 PCE-4128 NB PCIe Configuration
68