Vcr Functions; Playback; Recording And One-Touch Timer Recording (Otr) - FUNAI W4D-D4180DB Owner's Manual

E9G04ED_EN.book Page 68 Tuesday, March 27, 2007 10:27 AM

VCR Functions

Playback

VCR VCR
1
Press [STANDBY-ON] to turn on the
unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2
Press [VCR
3
Insert a pre-recorded tape, then
press [PLAY P] to begin playback.
4
During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
5
Press [PLAY P] to resume playback.
6
Press [STOP S] to stop playback.
7
Press [OPEN / CLOSE O] to eject the
tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[PROG. / ].
K L
EN
].
68
Recording and One-touch Timer
Recording (OTR)
Basic Recording
VCR VCR
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons] or [PROG.
remote control.
• There is a tape with a record tab in the unit.
Tape speed Recording / Playback Time
Type of tape E60 E120
SP speed 1 hour 2 hours
LP speed 2 hours 4 hours
• Refer to page 30 for instructions on timer recording.
1
Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR ].
3
Select the recording speed using
[REC SPEED].
• The desired recording speed is selected in SP
(standard play) or LP (long play) speed by
pressing [REC SPEED].
4
Select the desired channel to record
using [PROG. U / D] or
[the Number buttons].
5
Press [REC / OTR] to start recording.
To temporarily stop recording or to resume it,
press [PAUSE p].
After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head from damage.
6
Press [STOP S] when the recording
is completed.
/ ] on the
K L
E180 E240
3 hours 4 hours
6 hours 8 hours