Dubbing Mode - FUNAI W4D-D4180DB Owner's Manual

E9G04ED_EN.book Page 27 Tuesday, March 27, 2007 10:27 AM
Hint
• If you select "Stereo":
The audio will be recorded as "stereo audio".
• If you select "Bilingual":
The audio will be recorded as "bilingual audio" (see
"Setting Bilingual Recording Audio" below for more
detail).
Setting Bilingual Recording Audio
Video
DVD-RW DVD-RW DVD-R DVD-R
You can select either "Main" or "Sub" audio to record a
bilingual broadcast in Video mode.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER].
2
Select "Recording" using [U / D],
then press [ENTER].
3
Select "Bilingual Recording Audio"
using [U / D], then press [ENTER].
4
Select "Main" or "Sub" using
[U / D], then press [ENTER].
General Setting
Playback
Display
Video
Recording
Bilingual Recording Audio
Clock
Main
Channel
DivX Sub
Reset All
5
Press [SETUP] to exit.
Note
• If you are recording onto a VR mode disc, both
"Main" and "Sub" will be recorded regardless of your
setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
Auto Chapter
Recording Audio Select (1H)
Auto Finalise
Aspect Ratio (Video mode)

Dubbing Mode

Make Recording Compatible
Bilingual Recording Audio
External Input Audio
27
Recording Audio Select (1H)
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R
You can enjoy high quality sound recording. This
function works only when the recording speed is set
at 1H.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER].
2
Select "Recording" using [U / D],
then press [ENTER].
3
Select "Recording Audio Select
(1H)" using [U / D], then press
[ENTER].
4
Select "PCM" or "Dolby Digital"
using [U / D], then press [ENTER].
General Setting
Playback
Display Auto Chapter
Video Recording Audio Select (1H)
Recording Audio Select (1H)
Recording Auto Finalise
PCM
Clock Aspect Ratio (Video mode)
Dolby Digital
Channel Dubbing Mode
DivX Make Recording Compatible
Reset All Bilingual Recording Audio
External Input Audio
PCM: Records PCM audio for the best
quality sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
5
Press [SETUP] to exit.
Note
• "PCM" stands for Pulse Code Modulation. It
changes analogue sound to digital sound without
compressing audio data.
• When the recording speed is set at other than 1H,
the unit records "Dolby Digital" audio automatically
even if you selected "PCM".
EN