Timer Recording Using Vcr Plus+ System - FUNAI FDR-90E Owner's Manual

Timer recording using VCR Plus+
Video
DVD-R DVD-R
DVD-RW DVD-RW DVD-RW DVD-RW
The VCR Plus+ system lets you
set timer recordings very simply.
Just enter the PlusCode number
listed in the TV program guide.
The date, time, and channel for
the TV program to record will set
automatically.
Before setting timer recording
using VCR Plus+ system, read
"Guide channel setting" on pages
20-21.
1
In stop mode, press VCR
Plus+ button.
VCR Plus+ setting menu will
appear.
Screen:
VCR Plus+
Please enter a Plus Code No.
- - - - - - - - -
Note:
When eight timer recordings have
been scheduled, the Timer
Programming list will appear
instead.
2
Enter the PlusCode number
correctly using number but-
tons.
VCR Plus+
Please enter a Plus Code No.
1 2 3 4 - - - - -
3
Press ENTER button.
The Timer Programming list will
Recording
appear.
VR
When the Guide channel has
not been assigned:
The CH area has been selected,
then enter the channel number to
record using K / L buttons.
Setup > Recording > Timer Programming
Date
1. JAN/12 10:00PM
2. - - -
3. - - -
4. - - -
5. - - -
6. - - -
7. - - -
8. - - -
When the Guide channel has
been assigned:
The programming you made with
VCR Plus+ system is hilighted to
check.
Setup > Recording > Timer Programming
Date
1. JAN/12 10:00PM
2. - - -
3. - - -
4. - - -
5. - - -
6. - - -
7. - - -
8. - - -
• If you want to change the set-
ting, use K / L / { / B but-
tons.
4
Press ENTER button after
you entered or confirm the
information.
Your VCR Plus+ program setting
will be stored.
5
Press VCR Plus+ button to exit.
6
Press POWER button to
return to the timer standby
mode.
Start End CH Speed
10:30PM 1H
Start End CH Speed
10:30PM CH8 1H
® system
6
POWER
.@/:
VCR Plus + ABC
1
GHI JKL
5
PQRS TUV
CLEAR SPACE
REPEAT CM SKIP ZOOM DISPLAY
MENU/LIST TOP MENU
RETURN SETUP
REC REC
MONITOR SPEED REC/OTR
SKIP CH
STOP PLAY
REV FWD
PAUSE
Note
• Press { button to erase the
latest number entered incor-
rectly at step 2.
• Press CLEAR button to erase
all numbers entered incor-
rectly at step 2.
• If you enter an incorrect
PlusCode number at step 2
or the programming is not
available, the error message
"Code Error!" will appear.
Enter the correct PlusCode
number.
Remember:
If your cable box or satellite
box is connected as in
"Connection B" on page 14,
set your cable box or satellite
box to the channel you want
to record; leave your cable
box or satellite box on for
the timer recording.
OPEN/
CLOSE
DEF
MNO
2
WXYZ
3
4
39