Settings For External Equipment - FUNAI W4D-D4180DB Owner's Manual

E9G04ED_EN.book Page 34 Tuesday, March 27, 2007 10:27 AM
Example 1
Timer
Recording
Satellite Link
Actual
Recording
Example 2
Timer
Recording
Satellite Link
Actual
Recording
Example 3
Timer
Recording
Satellite Link
Actual
Recording
EN

Settings for External Equipment

Connection to External Equipment
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
Connect the external equipment using either the input
jacks, AV1, AV2 (Rear) or AV3 (Front). However, for
AV3 jacks, you have to select S-VIDEO input or
VIDEO input jacks depending on the connected
devices.
Use a commercially available Scart, S-Video or Video
cable and an Audio cable for this connection.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER].
2
Select "Video" using [U / D], then
press [ENTER].
3
Select "Select Video" using [U / D],
then press [ENTER].
4
Select the input jack type to be used
using [U / D], then press [ENTER].
General Setting
Playback
Display TV Aspect
Video Select Video
Recording Video Out
Select Video - AV3(Front)
Clock
Video In
Channel
S-Video In
DivX
Reset All
• If you want to use VIDEO input jack (Composite),
select "Video In".
• If you want to use S-VIDEO input jack, select
"S-Video In".
5
Press [SETUP] to exit.
34
VCR VCR VCR
DVD-R DVD-R