Satellite Link - FUNAI W4D-D4180DB Owner's Manual

E9G04ED_EN.book Page 33 Tuesday, March 27, 2007 10:27 AM

Satellite Link

You can set the unit to start recording whenever it
detects the video scart control from the external tuner.
Preparing for the Satellite Link Timer Recording:
[Preparation of the external tuner]
• The external tuner should be equipped with
some kind of timer function. Using timer function
of the tuner, set it to be turned on when it comes
to the time you want to start recording, and off
when it comes to the time you want to finish
recording. (Refer to the tuner's manual on how
to set the timer.)
• Make sure to turn off the external tuner when
you finish setting.
[Preparation of this unit]
• Make sure to select the desired Recording
speed beforehand.
External tuner
(not supplied)
Scart cable (not supplied)
1
Press [SETUP].
2
Select "Timer Programming" using
[U / D], then press [ENTER].
3
Select "Satellite Link" using [U / D],
then press [ENTER].
4
Select the time, media or speed
using [U / D], then press [ENTER].
Satellite Link
Start
0:00
To Standby Mode
5
Set the desired start time using
[U / D], then press [P].
• The hour can be selected among 0-23.
• Repeat this step to set the desired minutes.
6
Select the recording media using
[U / D], then press [P].
DVD/VCR DVD ANTENNA
DIGITAL AUDIO S-VIDEO COMPONENT
AV2(DECODER)
AUDIO OUT OUT OUT VIDEO OUT
Y
IN
L P B
/C B
OPTICAL COAXIAL
AV1(TV)
R P R
/C R
OUT
DVD
Speed
VCR
DVD 1H
33
7
Select the recording speed using
[U / D].
Refer to "Recording Speed" on page 23 for DVD
or page 68 for VCR.
• If you want to edit the time, media or speed
/
press [L], then press [U
8
Press [ENTER].
"To Standby Mode" is highlighted.
Satellite Link
DVD
Start Speed
VCR
3:00 DVD
To Standby Mode
9
Press [ENTER] again.
In a second, the unit will be turned off
automatically as it goes into the Satellite Link
standby mode.
• Until the time you set in "Start", the clock will
appear on the front panel display.
• "Sat" will appear on the front panel display at the
start time.
To cancel the Satellite Link function while in the
Satellite Link standby mode:
Press [T-SET] to turn on the unit.
To cancel the Satellite Link function while the
Satellite Link Recording is in progress:
Press [STOP S] on the front panel of the unit.
Note
• If you have not set the clock, the clock setting
window will appear at step 3. Follow to step 4 in
"Manual Clock Setting" on page 22.
• You cannot set the End time for the Satellite Link
Timer Recording on this unit.
• Recording picture will be distorted if the copy
protection signal is being detected during Satellite
Link Timer Recording.
• When a regular Timer Recording and the Satellite
Link Timer Recording are overlapped, the examples
are given below.
D] to correct them.
1H
EN