Table of Contents
Advertisement
8
INSTALLATION
1. DUCTED INSTALLATION
a.
Make sure all preparation steps are completed.
b.
Feed the wires coming out of the hood through the bottom of the cabinet.
c.
Lift the unit up flesh against the wall and the bottom of the cabinet.
d.
Using the screws and washers provided, insert into each of the keyhole
openings and tightly secure the unit against the bottom of the cabinet.
NOTE: Install more screws through the back of the unit if necessary.
e.
Connect a 6" or 7" ducting to the collar of the hood.
f.
Seal the connection points with aluminum tape.
g.
Finish off by sealing the connection point with aluminum tape.
INSTALLATION
Advertisement
Table of Contents
