Table of Contents
Advertisement
2. COLD WEATHER INSTALLATION (OPTIONAL)
a.
Check with your local building codes to see if a CFM reducer is an
acceptable alternative to make-up air.
b.
Remove the WS208LCFMR (CFM Reducer) and inspect for any sign of
defect or damage. (ie. Cracks, broken flips)
c.
AFTER COMPLETING Step A – D of Section 1 UNDER CABINET
INSTALLATION
d.
Place the CFM reducer onto the outlet of the unit and seal the connection
point with aluminum tape. (Be sure it is secure with no opening or gaps)
e.
Connect a 6" ducting to the collar of the CFM reducer.
f.
Finish off by sealing the connection points with aluminum tape.
NOTE: If using CFM reducer, you must connect the reducer to unit
before continuing.
INSTALLATION
9
Advertisement
Table of Contents
