Table of Contents
Advertisement
To edit a Separated Zone:
The following can be changed for a Separated Zone: Area, Edge
Terminate and Base Station.
To change the Area of a Separated Zone:
Scroll to select Area. Press
Scroll to select the new area size. Press
Edge Terminate indicates to the unit how far to mow the edge
before starting to mow the inner lawn.
To change the Edge Terminate settings of a Separated Zone:
There are two methods of updating Edge Terminate:
Set Distance and Learn Distance.
Scroll to select Edge Terminate. Press
Set Distance:
Press
Press
Scroll to enter a Distance. Press
Learn Distance:
o
Place the unit facing the Perimeter Wire. Press
unit will follow the Perimeter Wire.
o
When the unit has completed a full turn around the
Edge, press
Learn the Distance.
If an additional Base Station has been added to a Separated
Zone, Base Station has to be set to Yes.
To change the Base Station setting of a Separated Zone:
Scroll to select Base Station. Press
Scroll to select Yes and No. Press
Yes = an additional Base Station.
4.3.4
Islands
In rare cases, you may notice that the mower circles a Perimeter
Island unnecessarily while searching for the Base Station. The
Islands option helps overcome this situation. To avoid such cases,
turn the Islands feature On.
Scroll to select required Zone. Press
Scroll to select On/Off. Press
34
.
.
.
to select By Distance.
to select Set Distance.
.
. Press
to allow the unit to
.
.
.
.
the
.
26
en
Advertisement
Table of Contents
