Wolf Garten Robo Scooter 1800 Operating Instructions Manual page 31

4.3.2.2 Interval
The Interval option controls the time between mowing cycles.
Shorter intervals between cycles create shorter growth
periods. Longer intervals allow for longer grass growth periods.
Grass growth rate changes during the year (depending on
temperature, grass type, fertilizing and etc.).
The default Interval is Twice a week.
During off-season when growth rate of the grass is slower, it
is recommended to change the Interval to Once a Week or
Every Two Weeks. This resting period helps the grass and
prolongs the lifetime of the mower.
High fertilization and favorable weather conditions may cause
the grass to grows faster. In such cases, use the Interval
option to decrease the time between cycles.
The minimum Interval is Every 2 Days. but is available only
for relatively small areas where the mower can complete
mowing the area within 2 days.
To change the interval follow these steps:
4.3.3 Zones – To Add / Remove / Edit Zone(s)
Use the Zones option to add, remove or edit preset zones.
Note: Sub-Zones are marked by numbers (1, 2, 3, and 4).
Separated Zones are marked by letters (A, and B).
en
Scroll to select Operations from the Lawn
Options menu. Press .
Scroll to select Interval. Press .
Scroll to select All Zones / By Zone. If By Zone
is selected scroll to select Zone. Press
Scroll to change mowing Interval.
The default interval is Twice a week.
Scroll to select Zones from the Lawn Options
menu. Press .
Scroll to select Add / Remove / Edit. Press .
23
Operation
(Section 4.3.3)
(Section 4.3.3.1)
(Section 4.3.3.2)
(Section 4.3.3.3)
31