Wolf Garten Robo Scooter 1800 Operating Instructions Manual page 30

To select Inactive Hours:
Scroll to select Inactive Time from the Lawn
Options Menu. Press
Scroll to select Hours. Press
Scroll to select between 1
press
You can deactivate up to 2 time slots.
Scroll to togle the inactive window On/Off.
Press
Set the start and end times for this time slot.
Scroll to select OK box. Press
The unit will not operate on the hours you have set. Inactive hours are the same for all days of the week
If too many hours have been deactivated relative to your lawn size, Check Inactive Time message will be displayed.
4.3.2 Operations
4.3.2.1 Intensity
The Intensity option controls the number of operations needed to cover the lawn size.
There are cases where the selected lawn area is not completely mowed and patches of uncut grass are visible.
This can occur when the:
Zone area set is smaller than the actual area of the lawn.
Lawn shape is complex (shape, narrow passage, slopes and obstacles).
If the zone area set is smaller then the actual area, change the Area settings (Lawn Options > Zone Edit > Area).
Otherwise, use the Intensity option to increase the number of operations.
To change the Intensity follow these steps:
Scroll to select Operations from the Lawn
Options menu. Press
Press
Scroll to select All Zones / By Zone. Press
If By Zone is selected scroll to select Zone.
Press
Scroll to increase or decrease the Intensity
level. The Intensity default is 0% and can be
changed from -50% to +50%.
After Setting the Intensity one of the following messages will be displayed:
Intensity Updated: When the selected value was accepted.
Intensity Limit (%): If the selected value is higher than the maximum possible intensity for the lawn area.
Press
30
.
.
st nd
or 2 time slot and
.
.
.
.
to select Intensity.
to set or to re-select.
.
22
.
en