Front Panel Im-300 - Inter-m IM-300 Operation Manual

MAIN CONTROLLER AMPLIFIER/SUB AMPLIFIER/CHAIRMAN UNIT/DELEGATE UNIT
Front Panel (IM-300)
Front Panel (IM-300)
1 2
1. HANDLE
A handle is designed to install or easily handle this unit on the racks.
2. POWER SWITCH
This is a switch to supply power. Pressing this switch enables the VFD (Vacuum Fluorescent Display) to
display 'MIC INITIAL' for about 10 seconds and indicate mic numbers connected and operate the unit.
3. USB JACK
This is a jack to record contents of conference in MP3 file. Pressing the recording button which is No.9 of the
front panel after connecting USB memory enables to start saving. In ending Save File, remove USB memory
after pressing the recording button once again. Where saving capacity of USB memory is 1Gbyte, the unit
can save memory for 20 hours at the bit rate of 128Kbit.
4. VFD (VACUUM FLUORESCENT DISPLAY) DISPLAY WINDOW
This is a window to display current progresses and status of the equipment system for meeting. Items that the
VFD displays include operation mode (free speaking and reservation mode), person numbers waiting for
reservation, emergent speaking request, continued speaking time, USB recording, input signal level and
main volume level.
5. MODE BUTTON
This is a mode to select person numbers to speaking and Reverse Mode and Free Mode are cyclic whenever
pressing the button.
- Reserve Mode: A person with relevant number by reservation.
- FREE Mode: All participants can speak.
6. ALL CLEAR BUTTON
This is a switch to cancel speaking of all persons to speaking and reserve speaking irrespective of modes of
No. 5 Mode button of the front panel.
4
IM-300, IMS-300, IMC-300, IMD-300
3 4 5 6 7 8 9 10
11 12 13 14 15