Front Panel - Inter-m D-6000 Operation Manual

ProfessIonAl netWork AMPlIfIer

Front Panel

Front Panel
1. ACT, STBY
ACt leD : this leD turns on when power switch is pressed. the device is operable when this leD is on.
stBY leD : this leD turns on when AC power cord is connected. the device is standby when this leD is on.
2. LEVEL, CLIP, PROTECTION INDICATOR (CH1, CH2)
Indicator display of unit's output level status.
※ note: If ClIP leD is lit, sound output is distorted. reduce the volume level.
sIG (-30dB): Green, -10dB: Green, ClIP: Yellow, ProteCt: red
3. VOLUME CONTROL (CH1, CH2)
Volume adjustments are made. turn clockwise to increase the volume level.
4. FAN VENTS
the air circulation passage to prevent overheating of the device, please do not obstruct the flow as air flows
from front to back.
5. POWER SWITCH
this button controls power status PoWer leD turns on when this switch is pressed, and after the button is
pressed booting-up takes approximately 43 seconds.
4 D-6000
D-6000