Ims-300 - Inter-m IM-300 Operation Manual

MAIN CONTROLLER AMPLIFIER/SUB AMPLIFIER/CHAIRMAN UNIT/DELEGATE UNIT
Rear Panel (IMS-300)
Rear Panel (IMS-300)
1 2
1. IMD-300 (DELEGATE UNIT) CONNECTOR
This is a D-SUB 15P Female Connector for connecting the delegate mic unit, IMD-300 by using connecting
cable 1. Up to 30pcs of IMD-300 mic unit can be additionally connected.
* Connecting cable 1 (Length: 2M, D-SUB MALE, D-SUB FEMALE) is basic specification and is provided in
the mic unit (IMC/IMD-300). Since this cable is designed only for this purpose, please use included cable
provided.
2. LINK IN CONNECTOR
This is a D-SUB 15P Female Connector, which connects the unit to the sub-amplifier expansion connector or
the Link Out of IM-300 or link output of former IMS-300 using connecting cable 2.
* Connecting cable 2 (Length: 2M, D-SUB MALE, D-SUB MALE) is basic specification and is provided in the
IMS-300 (sub-amplifier). Please use included cable provided. About cables refer to the 16 page.
3. LINK OUT CONNECTOR
This is a D-SUB 15P Female Connector, which connects the unit to the sub-amplifier expansion connector or
the Link In of IMS-300 (sub-amplifier) using connecting cable 2.
* Connecting cable 2 (Length: 2M, D-SUB MALE, D-SUB MALE) is basic specification and is provided in the
IMS-300 (sub-amplifier). Please use included cable provided.
4. AC INLET (AC POWER INPUT)
This is a power cord connecting jack. Available power is for AC 220~230V 50/60Hz.
12
IM-300, IMS-300, IMC-300, IMD-300
3
4