Disassembly/Stowage Of 5-Point-Belt-System - CYBEX Sirona User Manual

10
11
15
23
31
13
22
11
DisassembLy/stoWaGe oF tHe 5-point-beLt-system
• First bring the headrest in to the highest position.
• loosen the shoulder belts (10) by activating the central adjuster (13) and pull
both shoulder belts (10) out as far as you can.
• open the belt buckle (11) by pressing the red button
• Pull up the cover in the sitting area until the storage compartment for the harness
Buckle can be accessed.
• detach the shoulder pads (15) from the shoulder belts (10) and the belt buckle
(11).
• now pull the harness buckle through the seat cover and bring the belt buckle and
the belt tongues back together again.
• open the red cover of the storage compartment (22) in the seat and place the
belt buckle (11) inside.
NOte! the seat cannot be rotated to the forward-facing position until the belt buckle
(11) has been stowed in the storage compartment (22).
• Close the red cover (22) and re-apply the seat cover. always keep the shoulder
pads handy.
• now take the provided safety cushion (23) out of the storage.
!
Warning! use of the 5-point belt system in the forward-facing position is
not permitted.