Error/Warning Indications
Messages appear on the front panel display to notify you of warnings, errors, and operations that require
confirmation. This unit does not emit warning sounds. (Warning sounds may be emitted from devices
connected to this unit.)
Error indications
The unit stops operation after the following indications.
Error indication in the
front panel display
E + Error code
Warning indications
If the following indications appear, follow the message instructions to resolve the problem.
Warning indication in
the front panel display
Camera A disconnect
Camera B disconnect
Cause and measures
The unit may be defective.
Turn off the power and consult Sony service personnel.
(If the power does not turn off even after pressing the On/Standby button and setting the
unit to the standby state, disconnect the DC power cable.)
Cause and measures
No camera head is connected to the CCU. Check that the CCU and the camera head are
connected properly via the camera cable, and restart the unit.
Error/Warning Indications
45